 
|
Inject Epoxy at 2000psi with this Dual Component System: This dual component injection grouting dispenser will inject our 1:1 Ratio Epoxy Injection Resin products with up to 2000psi of force. This gives the installer the high injection pressures required in any project that may come along. Deep penetration of the epoxy or polyurethane is easy to achieve while using the Reactor E-10 fitted for injection grouting work. This system has been configured to meet the rigid project specifications that call for a plural component injection system but doesn't compromise on crucial available injection pressures. Fine tight cracks are no problem for this beauty. With smart controls that are easy to setup and simple to operate, the Reactor E-10 is a natural complement to any proportioning equipment line-up. Use it for Epoxy or Polyurethane injection grouting projects using our specially formulated 1:1 grouts designed specifically for the Reactor E-10 system. The Reactor E-10 is a portable, electric-powered, 1:1 mix ratio proportioner, for use with a wide variety of coatings, foams, sealants, and adhesives. Materials must be self-levelling and pourable, and may be applied with impingement mix spray guns, disposable mixer guns, or flush-type mix manifolds. Reactor E-10 is gravity-fed from 7 gal. (26.5 liter) supply tanks mounted on the unit. The tanks are translucent to allow monitoring of fluid level. Severe duty, positive displacement reciprocating piston pumps meter fluid flow to the gun for mixing and applying. When set to recirculation mode, Reactor E-10 will circulate fluids back to the supply tanks. Heated models include separate thermostatically controlled heaters for each fluid, and an insulated hose bundle with circulation return hoses. This allows the hoses and gun to be preheated to the desired temperature before spraying. Digital displays show the temperatures of the two fluids. An electronic processor controls the motor, monitors fluid pressures, and alerts the operator if errors occur. Automatically maintains selected pressure output for dispensing or spraying. Ships with: - Electric powered proportioner capable of 2000psi max. pressure and 1 gpm max. flow rate.
- 120V Un-heated system, (1) 15A cord.
- 20 feet of dual moisture resistant high pressure hose bundle with manual mix manifold, static mixer, whip hose and pressure relief-dump set-up.
- Mix manifold has a solvent port to enable flushing of the static mixer and whip hose set-up.
This machine can allow your company to branch into the spray foam and polyurea application industry. 
Read the full user manual here: Reactor E-10 Manual.pdf
| Choose from Available Options: |
| Available for Reactor E-10: |
|
|
Pressure Grouting 
