|
Sub-Surface Mounting Epoxy Port
"Ports n Plugs" Style Description: These inexpensive plastic sub-surface mount ports are used for low to medium pressure epoxy and polyurethane injection on cracks with hand operated manual equipment. Packaging: Single box of 1000 single ports with attached plug component to prevent run-out of injected resin products. Tips: Drill a 1/2" hole to the desired depth and attach this port by first inserting it into the cleaned hole then use the epoxy cap seal gel used to seal the crack surface prior to injection. Warranty: All information and statements are intended for persons having the required skill and know-how and do not relieve the user from verifying the suitability of the information and statements given for a specific purpose prior to use. The information, and in particular, the recommendations relating to the application and end-use of our products, are given in good faith based on Johnson Group Online and its manufacturers current knowledge and experience of the products when properly stored, handled and applied under normal conditions, within their shelf life, but accuracy and completeness of said information is not guaranteed and are not to be construed as a warranty either expressed or implied. In practise, the differences in materials, substrates and actual site conditions are such that no warranty in respect of merchantability or of fitness for a particular purpose, nor any liability arising out of any legal relationship whatsoever, can be inferred either from this information, or from any recommendations, or from any other advice offered. Users should always refer to the most recent issue of the Technical Data Sheet and the MSDS for the product concerned, copies of which will be supplied on request or can be accessed in the internet under www.leak-proof.com/catalog. Neither seller nor manufacturer shall be liable to buyer or any third person for any injury, loss or damage directly or indirectly resulting from use or inability to use this product. The proprietary rights of third parties must be observed. All orders are accepted subject to our current terms of sale and delivery. Johnson Group Online (1569373 Ontario Ltd.) warrants its products to be manufactured free of defects and will replace or, at our option, refund the purchase price of any materials proven to be defective. Seller’s and manufacturer’s sole responsibility shall be to replace that portion of the product of this manufacturer which proves to be defective. This limited warranty is in lieu of any other guarantee, expressed or implied, including warranties of merchantability or fitness for a particular purpose. In no event will Johnson Group Online(1569373 Ontario Ltd.) or its manufacturers be liable for incidental or consequential damages nor shall liability, if any, extend beyond the purchase price of the material. KEEP ALL PRODUCTS
OUT OF REACH OF CHILDREN FOR INDUSTRIAL USE ONLY We know you will be impressed by our products.
We are!
Johnson Group Online
(1569373 Ontario Ltd.)
17 McConkey Place, Barrie, Ontario, Canada L4N 6H1
Office (705) 728-3476, Fax (705)-728-3305
Email johnsongroup@leak-proof.com
www.leak-proof.com
|
Pressure Grouting 
