This is the
Product Listing Page(s)
Water Cut-off Grout
VISCOSITY 205 cps @ 25°C
AquaFLEX-SF forms a tough "Semi Flexible" sealing
membrane in the joint or crack with the most superior adhesion to damp or wet
concrete. AquaFLEX-SF is a one component
hydrophobic MDI based 100% solids polyurethane resin
that is water reactive. There are no fillers in this product. Designed for joints and cracks in
concrete structures. It sticks tenaciously to concrete
surfaces. AquaFLEX-SF will travel nicely
into the usually very tight bottom 24" of a foundation wall crack at between 800
- 1500 psi because of its' low viscosity.
When AquaFLEX-SF comes in contact with water it quickly
expands and then depending on temperature and the amount of required activator
used (AquaFLEX-ACT), cures
to a closed cell polyurethane foam. The onsite technician can adjust the dosage
of AquaFLEX-ACT to attain
the desired reaction time and size of the grout.
This product does not have unpleasant odours which may cause
problems in commercial and residential applications.
The cured material has
excellent cut/tear resistance, high elongation and is
virtually unaffected by
ATTENTION: This product requires an Activator called
It is ordered separately. The
activator is mixed into the grout just prior to use.
See the individual product data sheets for
much more detail.
Click Here to learn how to select the right AquaGROUT
using our handy grout selection
Johnson Group Online
We know you will be impressed by our
|If there are no products in this category yet, they are likely in the process of being listed.
Please choose a sub-category if available below, or go back.