DESCRIPTION CPD® Chemical Form Release Agent (Concentrate) is a blend of complex fatty acids that chemically react with the free lime in concrete to neutralize bond at the form interface. This product is supplied as a concentrate and must be blended with furnace oil or diesel fuel before use. WHERE TO USE The mixed product can be used for application to plywood, timber, steel, plastic faced form work and rough sawn timber form work where a grained effect is required.
BENEFITS
Less expensive to transport than pre-mixed product Use in the field is less expensive than purchasing premixed form release agent APPLICATION
Mixing Instructions:
LIMITATIONS
Not for tilt up construction Concentrate must not be allowed to freeze Field additions are subject to error. Care must be taken to assure the correct amount of furnace oil or diesel fuel is added. COVERAGE Once mixed, the form release agent made from concentrate (as per instructions) will have the following coverages:
Wood and plywood forms:
Metal and plastic forms:
PACKAGING 208L (55 U.S. gal) drums - 220 kg. (485 lbs.)
CLEAN UP All equipment can be cleaned with mineral spirits.
STORAGE Store in a heated dry warehouse. Do not freeze. Avoid any contamination of product by water.
SHELF LIFE Two years from the date of manufacture in original, unopened container when stored under normal warehouse conditions.
SAFETY PRECAUTIONS Consult Material Safety Data Sheet (M.S.D.S.) For specific instructions. M.S.D.S. # 66 .
WARRANTY The recommendations made and the information herein is based on our own and independent laboratory experience, and is believed to be accurate under controlled conditions. However, no warranty or guarantee of accuracy is made because we cannot cover every possible application of product nor anticipate every variation encountered in weather conditions, job-conditions, methods used and types of surfaces on which the product is applied. The users shall make their own tests to determine the suitability of such products for any particular purpose. CPD® makes no warranties with respect to this product, expressed or implied, without limitation, the implied warranties of merchantability or fitness for a particular purpose. CPD®’s liability shall be limited in all events to supplying sufficient product to re-treat and/or repair the specific area to which CPD® product has been applied. CPD® reserves the right to have the true cause of any difficulty determined by accepted test methods. CPD® shall have no other
liability, including liability for incidental, consequential or resultant damages, however caused, whether due to breach of warranty, negligence, or strict liability.
THIS WARRANTY MAY NOT BE MODIFIED OR EXTENDED BY REPRESENTATIVES OF CPD® , ITS DISTRIBUTORS OR DEALERS.
Pressure Grouting 
