AquaFLUSH
Crack Flushing Agent (Descaler)

AquaFLUSH is an environmentally sensitive, calcium, scale, rust, and lime remover, ideally suited for flushing out cracks prior to the injection of polyurethane or epoxy resins. AquaFLUSH is rapidly biodegradable and non-ozone depleting, and does not present the health and safety concerns associated with mineral acid based products like phosphoric acid. AquaFLUSH is cost effective as it can be diluted with up to three parts of water. Can also be used as a concrete cleaner and etch prior to the application of coatings, sealers, and toppings.

Packaging:     20 liter (5.28 gal) plastic pail.

Basic Use:     For flushing dirt and calcium deposits out of crack and joints prior to injecting polyurethane grouts or epoxy resins.

Advantages:

• Non-fuming and non-corrosive to skin or steel.
• Foams away calcium, rust and lime in seconds.
• Consumes twice the amount of calcium as phosphoric acid.
• Versatile, can be used in just about any cleaning application where acid based products are used.
• Is non-carcinogenic, non-toxic, and non-flammable.
• Is rapidly biodegradable and non-ozone depleting.
• Can be used as a concrete cleaner & etch.
• Can be diluted up to 2 to 1 with water to make 60 liters (15.6 gal) of product.

Physical Properties:

               APPEARANCE                                  CLEAR LIQUID
                    DENSITY                                          1.035 +/- 0.02
                    BOILING POINT                               100º C, 212º F
                    FREEZING POINT                             0º C, 32º F
                    SOLUBILITY                                     100% IN WATER
                    PH                                                     7 +/- 0.3
                    PKa                                                   0.176